在线一本码道高清

Manufacturing and application technology of gas or liquid storage or distribution device
  • Manufacturing method of heating device for loading and unloading high-viscosity chemical tanker
    The utility model relates to a heating device, in particular to a heating device for loading and unloading high-viscosity chemical tankers. In the past, when train tankers loaded and unloaded high-viscosity chemicals, especially during the loading and unloading of asphalt, the heating and loading methods were required. Will cause pollution to the environment. In order to overcome the above problems, we have developed a heating ...
  • Manufacturing method of novel barrel pump
    The utility model relates to a barrel pump, in particular to a novel barrel pump. Barrel pumps are also known as oil barrel pumps. Oil barrel pumps should be considered in terms of liquid flow, device lift, liquid properties, piping layout, and operating conditions according to the process flow and water supply and drainage requirements. Convenient maintenance, reliable performance, long service life, simple appearance, advanced and reasonable structure, international standards, and transportation of solid particles-free liquid. Drum pump classification: Hand drum pump ...
  • Method for collecting and purging residual liquid of asphalt crane tube
    The utility model relates to an auxiliary equipment for coal coke chemical industry, in particular to a device for collecting and purging residual liquid of an asphalt crane pipe. Asphalt is a major product in the tar processing industry. Its transportation methods are solid transportation and liquid transportation. Solid transportation is used when the distance is long, and liquid transportation is used when the distance is short. Before the liquid transportation, the liquid asphalt produces toxic asphalt fume when it is loaded and unloaded from the storage tank to the tank truck, causing harm to the human body and the environment, especially ...
  • Manufacturing method of filling machine control system
    The utility model relates to liquid filling, in particular to a filling machine control system. There is only one filling tip. When the filling liquid is switched, the liquid in the liquid storage tank must be drained first. The washing liquid for the assembly shop of different models and different models is divided into A liquid and B liquid. Or when switching from liquid B to liquid A, the liquid in the storage tank needs to be emptied before switching: 1), the employee closes the liquid filling valve in advance according to experience, ...
  • Vacuum pump valve manufacturing method
    The utility model relates to valve equipment, in particular to a vacuum pump valve. When the liquid is transferred from one container to another, a vacuum pump is used to transfer the liquid. The traditional vacuum pump must be normally open during use. To suspend the transfer of liquid, the vacuum pump needs to be stopped. Of course, the vacuum pump opens and closes for a long time, and the efficiency of liquid transfer is low. This requires the design of a valve with ...
  • Manufacturing method of weighted material injection trolley for wind power blade
    The utility model relates to a counterweight material injection trolley for a wind power blade. Wind turbines can convert the kinetic energy of the wind into electricity. The principle is to use wind energy to blow the blades on the tower to generate electricity. Generally a set of blades on a tower contains 3 blades. The complete set of blades must ensure the power generation and safety performance, and its weight and torque have strict design requirements. Since the blade cannot strictly guarantee the consistency of its weight and torque during the manufacturing process, it is necessary to ...
  • Manufacturing method of liquid distribution device
    The utility model belongs to liquid control, in particular to a liquid distribution device. The beer machine is a device for refrigerating beer and automatically dispensing beer, which provides great convenience for beer drinking, so it is widely welcomed by people. It is widely used in restaurants, bars, homes and other places. The traditional beer machine has a very simple structure, the liquid container is kept outside, the space occupation rate is high, and the use is limited. There are also some liquid containers ...
  • Manufacturing method of penetrating inverted cup separating device
    The utility model relates to a beverage cup separating device, in particular to a piercing type inverted cup separating device. At present, the common fresh-keeping cup separating equipment mostly uses the positive implantation method to pump liquid. The pipe is directly inserted into the beverage container bottle, and then filled with inert gas to press out the beverage by using air pressure. It is realized, and the pressure required to press out the drink in this way is very large, the air consumption is large, and the cost is high. and...
  • Manufacturing method of drinking fountain for barreled water
    The utility model relates to a drinking fountain for bottled water or bottled water, and belongs to the field of daily necessities. With the improvement of people's living standards, people are gradually using barreled drinking water for daily life. Especially workers who work on construction sites have poor working conditions and do not have water dispensers that are commonly used for barreled drinking water. In other places, there is not even electricity. In order to drink saliva, people can only hold the entire bucket and pour it into a cup for drinking. So ...
  • Manufacturing method of funnel structure with ventilation pipe
    The utility model relates to a funnel, and in particular relates to a ventilation design of the funnel provided with a tube structure. The funnel is generally tapered from top to bottom, with a tapered upper end and a tapered surface on the inside, and a tube end with a straight hole extending axially from the bottom, formed between the tube end and the outside of the cone. With a bend, the tube end of the funnel is inserted into the bottle, and the filling liquid is poured into the cone, so that the liquid is filled into the bottle through a straight hole. But because the tube end is inserted into the bottle ...
  • Recovery device for residual resin primer in barrel
    The utility model relates to a device for recovering residual resin primer in a barrel, which is used for recycling and reusing the residual resin primer in a barrel. With the rapid development of the automotive industry, the requirements for automotive primers are getting higher and higher. Solvent-based primers for automobiles are mainly based on nitro resins, epoxy resins, alkyd resins, amino resins, and phenolic resins. Materials, pigments generally use iron oxide red, titanium white, carbon black and other pigments and fillers, painting methods include spraying and dipping ...
  • Lubrication mechanism of inverted bottle sterilization chain plate in inverted bottle sterilization device
    The utility model relates to a production equipment for hot filling of beverages, in particular to an inverted bottle sterilization device. The inverted bottle sterilization device is an indispensable part of the beverage hot filling production line. Its sterilization principle is: sterilize the bottle cap by using high temperature materials in the bottle after high temperature filling. The high temperature material sterilizes the bottle cap and also preheats the bottle cap, so that the bottle cap and the beverage bottle have the same temperature before spray cooling, thereby ensuring that the bottle cap and the beverage bottle are cooled and deformed ...
  • Manufacturing method of cleaning and sterilizing device for filling oral liquid bottle body
    The utility model relates to a cleaning device, in particular to a cleaning and sterilizing device for filling oral liquid bottles. Filling oral liquid is a kind of aseptic or semi-sterile based on traditional Chinese medicine decoction, extracting the active ingredients in the medicine, adding additional agents such as flavoring agents, bacteriostatic agents, etc. Oral liquid preparation. Filling oral liquid When filling, you need to clean and sterilize the medicine tank, and the common oral liquid bottle cleaning on the market ...
  • Manufacturing method of stepping filling and capping machine
    The invention relates to an automatic filling and capping machine for liquids, in particular an automatic filling and capping machine for chemical packaging. At present, the known filling and capping of chemical water-based paint is composed of a filling head, a conveyor belt, a manual capping, and a capping machine connected to a packaging production machine, which has poor work continuity, high work intensity, slow speed, and low accuracy. For this discontinuous working process, it has a great impact on production and accuracy cannot be guaranteed. Summary of the invention ...
  • Manufacturing method of automatic paint filling device
    The utility model belongs to a paint filling device, in particular to an automatic paint filling device. In paint production enterprises, paint filling is an important part of paint packaging. How to increase the filling speed, reduce the labor intensity of employees, and reduce the amount of packaging that is too small or excessive has always been a problem in the packaging of the paint industry. At present, the paint packaging of general paint production plants adopts a self-flow filling method. Specifically, a large tank is fixedly arranged above the packaging workshop, ...
  • Manufacturing method of grease dispensing machine
    The utility model relates to a grease dispensing device, in particular to a grease dispensing device. Lubricating grease is a thick, grease-like semi-solid, used for the friction part of machinery, for lubrication and sealing, and also for metal surfaces, to fill gaps and prevent rust. It is mainly composed of mineral oil (or synthetic lubricant) It is made from thickener. Many parts of automobiles and construction machinery use grease as the lubricating material, which is often called butter. ...
  • Manufacturing method of automatic filling device
    The utility model belongs to a chemical device, and particularly relates to an automatic filling device. When filling in the traditional production process, when a quantitative volume needs to be filled, a metering cylinder or a flow meter is usually used to control it. For packaging drums with a volume of more than 200 liters, the metering cylinder needs to be filled first. It is more time-consuming to drive into the packaging barrel. Another type of flowmeter controls the filling volume. This filling method will be due to the viscosity, temperature ...
  • Manufacturing method of waste water barreling device
    The utility model relates to a device for dispensing waste water from a waste water tank. In the chemical production process, a large amount of gaseous wastewater containing toxic and harmful gases with an irritating odor is usually produced. These wastewaters need to be packed in wastewater buckets and processed by professional wastewater treatment agencies. For example, in the production process of the esterification reaction, the waste water produced contains a large amount of irritating odor gas. If it is simply divided into waste water buckets, the resulting ...
  • Manufacturing method of tea oil quantitative filling machine
    The utility model relates to a tea oil filling machine, in particular to a tea oil quantitative filling machine. Camellia oil, Camellia oleifera seed oil, also known as camellia oil, camellia seed oil, is a pure natural high-grade edible vegetable oil extracted from the mature seeds of the common camellia of the camellia family Camellia plant. Fresh fragrance and pure taste. The production of camellia oleifera needs to be packed by a filling machine. Existing camellia packing machines are often ...
  • Manufacturing method of blueberry juice production and transportation device
    The utility model relates to automatic production, in particular to a transportation device for blueberry juice production. Automatic production line refers to a production organization form in which the product process is realized by an automated machine system. It is formed on the basis of the further development of continuous pipelines. Its characteristics are: the processing object is automatically transferred from one machine to another, and the machine automatically performs processing, loading, unloading, inspection, etc .; the tasks of the workers are only adjustment, supervision ...
Technical classification